AMG · GEN-02 · FAA-H-8083-30B CH. 2
FAA A&P General: Regulations, Maintenance Forms, Records and Publications
For the FAA A&P General test, maintenance regulations, forms and records is chapter 2 of FAA-H-8083-30B, Regulations, Maintenance Forms, Records, & Publications. Its ACS subject area, Regulations, Maintenance Forms, Records, and Publications, is 5 to 10% of the test, or 3 to 6 of its 60 scored questions. Our question bank holds 317 questions on it, and the 10 below were written for this page.
Test shares and most-missed codes read from the FAA on 15 November 2026.
What FAA-H-8083-30B chapter 2 covers
Chapter 2 is the paperwork side of the job. It walks through Title 14 of the Code of Federal Regulations, the parts a mechanic works under: Part 1 definitions, Part 21 certification, the airworthiness standards in Parts 23, 25, 27, 29, 33 and 35, and above all Part 43 on maintenance and Part 91 on operation and inspections. It also covers the older Civil Air Regulations and suspected unapproved parts.
Then the documents: advisory circulars and how they are numbered, airworthiness directives, special airworthiness information bulletins, type certificate data sheets, supplemental type certificates, and the manufacturers’ manuals and service bulletins. It closes with the forms and records themselves: airworthiness certificates, registration, FAA Form 337 for major repairs and alterations, and how to make a maintenance record entry.
It runs from pages 2-1 to 2-46 of the Aviation Maintenance Technician Handbook: General, which the FAA publishes free as a PDF.
How much of the FAA A&P General test it is
- 5 to 10%OF THE TESTACS area AM.I.I
- 3 to 6QUESTIONSof 60 scored
- 317IN OUR BANKquestions on this subject
The FAA’s Companion Guide to the ACS gives every subject area a range, not a count. Regulations, Maintenance Forms, Records, and Publications (AM.I.I) is 5 to 10% (3 to 6 questions) on the 60-question General test. The 12 ranges for the General test add up to anywhere from 60% to 130%, so they say how big an area can get, not how many questions you will see from it.
Regulations, Maintenance Forms, Records, and Publications is not ours alone to cover: our Mechanic Privileges and Limitations questions are written to the same area.
No code in this area is on the FAA’s latest list of most-missed codes (2nd Quarter, CY25), which names a code only when it was missed more than 70% of the time on at least 100 tests.
Maintenance regulations, forms and records questions and answers
10 questions in the test’s own format, each with 3 options and 1 correct answer. Pick yours, then open it to see the answer and the reason. Each one names the page it was written from, so you can check it.
- Q.01
You pick up an advisory circular whose number stops after the dash number, with no letter on the end. What does the missing letter tell you about that circular?
FAA-H-8083-30B, ch. 2, p. 2-26
- AIt replaces every earlier circular written on the same subject
- BIt is the first version, never revised since it was issued
- CIt is binding on the public, unlike the circulars that carry a letter
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS B.
It is the first version, never revised since it was issued
An AC number has 3 parts: the subject area, a dash number giving its place in the sequence for that subject, and a letter showing the revision sequence once the circular has been revised. The first version of an AC carries no revision letter, so a number that stops after the dash number marks a circular that has not been revised. The letter has nothing to do with whether an AC is binding, since an AC binds no one unless a regulation incorporates it by reference, and it says nothing about replacing other circulars.
- Q.02
Why does the FAA send a new airworthiness directive to the registered owners of the aircraft it affects?
FAA-H-8083-30B, ch. 2, p. 2-21
- ABecause only an owner may sign the record that an AD was complied with
- BBecause mechanics are expected to learn of ADs from service bulletins
- CBecause the owner holds the main responsibility for its airworthiness
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS C.
Because the owner holds the main responsibility for its airworthiness
Keeping an aircraft airworthy, AD compliance included, is first of all the owner or operator's responsibility, and that is the reason the FAA sends new ADs to the registered owners of the aircraft affected. The mechanic who does the work makes the record entry for it, so signing is not reserved for the owner, and a service bulletin is no substitute for the AD itself.
- Q.03
An owner's engine is worn out, and you replace it with a new engine of the same model the aircraft's TCDS lists. How is that job classed?
FAA-H-8083-30B, ch. 2, p. 2-15
- AAs a repair, since it restores the aircraft's approved condition
- BAs an alteration, since a complete powerplant has been swapped out
- CAs preventive maintenance, since no airframe structure was touched
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
As a repair, since it restores the aircraft's approved condition
A repair returns the aircraft to its previous condition, while an alteration changes it from that condition. Even a whole engine change is a repair when the new engine is the one specified for that aircraft. Fitting an engine the TCDS does not list would make it an alteration. An engine change is also far outside the simple jobs that count as preventive maintenance.
- Q.04
Working as an independent mechanic, you have finished a major repair. The original Form 337 goes to the owner and a copy goes to the FAA. Do you have to keep a third copy for your own files?
FAA-H-8083-30B, ch. 2, p. 2-20
- AYes, the rule calls for a third copy held by the mechanic for 2 years
- BNo, and the rule forbids making more than the 2 copies it lists
- CNo, but keeping a copy of the work you did makes good business sense
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS C.
No, but keeping a copy of the work you did makes good business sense
For most major repairs and alterations, Form 337 is made out at least in duplicate, with the original going to the aircraft owner and a copy to the FAA Aircraft Registration Branch in Oklahoma City. A third copy is not required, but it makes good business sense for the mechanic or repair station to keep a copy of the work, and mechanics are encouraged to do so. Nothing limits the form to 2 copies: the one extra copy the rules do call for is the one kept aboard when fuel tanks are fitted in the cabin or cargo area.
- Q.05
A private pilot does preventive maintenance on the airplane she owns, as she is allowed to. What record does she owe for that work?
FAA-H-8083-30B, ch. 2, p. 2-16
- AA maintenance record entry, as anyone doing maintenance must make
- BNone, since preventive maintenance by the owner needs no entry
- COnly a note in her pilot logbook, signed with her certificate number
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
A maintenance record entry, as anyone doing maintenance must make
The maintenance record rule covers preventive maintenance along with other maintenance, so a pilot who does preventive maintenance on an aircraft she owns or operates must make a maintenance record entry for it, saying what was done, when, and who did it. Leaving it out breaks the aircraft's maintenance history, and a pilot logbook records flight time, not work done on the aircraft.
- Q.06
You remove a life-limited part that still has 300 hours of life left, and it goes on the stores shelf for now. Why must you keep control of it and track its life?
FAA-H-8083-30B, ch. 2, p. 2-16
- ASo it can be zero-timed when it next goes onto an aircraft
- BSo nobody installs it after it has reached its life limit
- CSo it can be sent back to the maker for a warranty claim
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS B.
So nobody installs it after it has reached its life limit
Whoever removes a life-limited part must control it and keep track of its life, by records, tags, marking, segregation, mutilation or another accepted method. The point is to stop the part from being installed again after it has reached its life limit. Tracking does the opposite of zero-timing it, since the hours and cycles already used go with the part, and warranty has nothing to do with the rule.
- Q.07
An owner is about to sell her airplane. It is in good condition, but its logbooks are loose, out of order and missing pages. How are those logs likely to affect the sale?
FAA-H-8083-30B, ch. 2, p. 2-39
- ANot at all, since a buyer pays for the airplane and not its paperwork
- BNot at all, since the FAA keeps a full copy of every logbook entry
- CThey can pull the price down, since poor logs count against an airplane
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS C.
They can pull the price down, since poor logs count against an airplane
Complete and organized maintenance logs can have a significant, and usually positive, effect when an aircraft is bought and sold, while poorly organized and incomplete logs can drag the selling price down. To a buyer the logs are the proof of the airplane's history, so their state counts as well as the airplane's condition. The FAA keeps copies of some forms, such as Form 337, but it does not keep an owner's logbooks; keeping them is the owner's job.
- Q.08
A new part arrives for a job, but the serial number on its paperwork does not match the one stamped on the part. Who should you take that concern to?
FAA-H-8083-30B, ch. 2, p. 2-24
- AThe shop foreman, the shift supervisor or the quality person
- BNobody, as long as the part itself looks new and undamaged
- CThe pilot, who decides whether the airplane will fly with it
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
The shop foreman, the shift supervisor or the quality person
A part whose paperwork does not match it cannot be treated as an approved part until the mismatch is sorted out, so it is a suspected unapproved part. When either the part or its paperwork is questionable, take your concern to the shop foreman, the shift supervisor or the assigned quality person, and keep the part segregated and quarantined until its disposition is settled. A part can look new and still be a bad one, and sorting out a suspect part is not the pilot's job.
- Q.09
An owner keeps the only set of her airplane's logbooks in a filing cabinet at the hangar. What extra step would best protect those records?
FAA-H-8083-30B, ch. 2, p. 2-22
- ASend the originals to the FAA registry, which keeps logbooks safe for owners
- BHave them copied or scanned, with the copy kept at a separate location
- CNothing, since the shops that did the work hold identical copies
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS B.
Have them copied or scanned, with the copy kept at a separate location
Logbooks kept in one place can all be lost at once to a fire, a flood or a storm at that site. It is a very wise idea to have them copied or scanned and to keep the copy somewhere other than where the originals are. The FAA registry does not store an owner's logbooks, and a shop's own work orders are not a full copy of the aircraft's records.
- Q.10
A new mechanic writes up an oil cooler change with a description, the date, his signature, certificate number and kind of certificate. Then he worries that he left off the usual closing words, "and is hereby returned to service." Is his entry complete?
FAA-H-8083-30B, ch. 2, p. 2-16
- AYes, those words are not required, since the signature is the approval
- BNo, without those words the work has not been approved for return to service
- CNo, it needs those words and an inspector's countersignature as well
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
Yes, those words are not required, since the signature is the approval
A maintenance entry must give a description of the work, the date it was completed and, for the person approving it, a signature, certificate number and kind of certificate. The familiar closing line about being returned to service is not required by the rule as it now reads, because the signature itself is the approval for return to service, for the work performed. No inspector has to countersign an entry for work like this oil cooler change.
We wrote these questions for this page from the FAA handbooks. They are not FAA test questions, and none of them comes from our question bank. Each one names the handbook page it was written from, so you can check it.
How a missed code comes back at the oral
Your test report does not show the questions you missed. It prints the ACS code for what each one tested, and a question missed in this subject prints a code that starts AM.I.I. The examiner reads those codes before your oral and practical.
The General oral runs from 4 questions if your written was clean up to 22, because every code you missed adds 1 more. General also carries 9 practical projects, each with 2 questions attached.
Knowledge elements are tested on the written test and the oral; Risk Management elements are tested on the oral and the practical; Skill elements are tested on the practical only. The whole process is on the oral and practical page, and there are cards to practice the spoken half with on FAA A&P oral test practice questions.
Questions people ask about maintenance regulations, forms and records
Q.01What is the difference between a major and a minor repair?
A major repair is one that, done wrong, might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics or other qualities of airworthiness, or one that is not done by accepted practices or elementary operations. Anything else is a minor repair. Part 43 Appendix A lists examples, and a major repair is recorded on FAA Form 337.
Q.02What is an airworthiness directive?
A legally enforceable rule the FAA issues under 14 CFR Part 39 to correct an unsafe condition in a product. Compliance is not optional: an aircraft that has not complied with an AD that applies to it is not airworthy, and the compliance goes in the aircraft records.
Q.03What goes in a maintenance record entry?
Under 14 CFR 43.9, a description of the work or a reference to data acceptable to the FAA, the date the work was completed, the name of the person who did it if that is someone else, and, if the work is approved for return to service, the signature, certificate number and kind of certificate of the person approving it.
Q.04Are advisory circulars mandatory?
No. An advisory circular gives guidance and an acceptable way to meet a regulation, not the only way, and it is not binding unless a regulation makes it so. AC 43.13-1B, the acceptable methods and techniques for inspection and repair, is the one a mechanic reaches for most.
Q.05How many maintenance regulations, forms and records questions are on the FAA A&P General test?
The FAA does not publish a fixed number. Its Companion Guide to the ACS gives the Regulations, Maintenance Forms, Records, and Publications subject area 5 to 10% of the General test, which is 3 to 6 of the 60 scored questions. That is a range, not a quota, so your own test can land anywhere inside it.
Q.06Which FAA handbook chapter covers maintenance regulations, forms and records?
Chapter 2 of FAA-H-8083-30B, the Aviation Maintenance Technician Handbook: General, titled "Regulations, Maintenance Forms, Records, & Publications". It runs from pages 2-1 to 2-46, and the FAA publishes the whole handbook free as a PDF.
Read the documents, not us
Every fact on this page was read from these on 19 August 2026 and 15 November 2026. They are the authority and we are the summary. If we and one of them disagree, they are right.
- FAA-H-8083-30B, Aviation Maintenance Technician Handbook: General, chapter 2www.faa.gov
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standardswww.faa.gov
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards: the written test blueprints (pages 13 and 14) and chapters 6 and 7www.faa.gov
- FAA, Frequently Missed Knowledge Test ACS Codes, 2nd Quarter CY25www.faa.gov
FREE PLAN · NO CARD · 25 QUESTIONS TO START
The bank holds 317 maintenance regulations, forms and records questions.
Start with one free set: 25 questions and 25 fill-in-the-gaps from any of our 44 subjects, which cover every ACS subject area. Each question has 3 answer choices, like the FAA A&P tests, with a written explanation behind every answer and, for every answer written from the FAA handbooks, the chapter it came from. It needs no card. Pro opens the rest of the bank, the full study guides and the timed mock papers.
Start freeOr answer a few first. The free FAA A&P practice test runs on the page, with no account.