AMG · GEN-13 · FAA-H-8083-30B CH. 13
FAA A&P General: Mechanic Privileges and Limitations
For the FAA A&P General test, mechanic privileges and limitations is chapter 13 of FAA-H-8083-30B, Mechanic Privileges & Limitations. Its ACS subject area, Regulations, Maintenance Forms, Records, and Publications, is 5 to 10% of the test, or 3 to 6 of its 60 scored questions. Our question bank holds 154 questions on it, and the 10 below were written for this page.
Test shares and most-missed codes read from the FAA on 15 November 2026.
What FAA-H-8083-30B chapter 13 covers
Chapter 13 is the short chapter on the certificate itself, read section by section from 14 CFR Part 65. It covers Subpart A, which applies to every certificate under the part, including application and issue, offenses involving alcohol and drugs, the temporary certificate and security disqualification, then Subpart D on mechanics: eligibility, the knowledge and skill tests, the experience needed, and the privileges and limitations of the airframe and powerplant ratings.
It then covers the inspection authorization, who may hold one and what it allows, and closes with ethics: what it means to be trusted to sign an aircraft back into service.
It runs from pages 13-1 to 13-8 of the Aviation Maintenance Technician Handbook: General, which the FAA publishes free as a PDF.
How much of the FAA A&P General test it is
- 5 to 10%OF THE TESTACS area AM.I.I
- 3 to 6QUESTIONSof 60 scored
- 154IN OUR BANKquestions on this subject
The FAA’s Companion Guide to the ACS gives every subject area a range, not a count. Regulations, Maintenance Forms, Records, and Publications (AM.I.I) is 5 to 10% (3 to 6 questions) on the 60-question General test. The 12 ranges for the General test add up to anywhere from 60% to 130%, so they say how big an area can get, not how many questions you will see from it.
Regulations, Maintenance Forms, Records, and Publications is not ours alone to cover: our Regulations, Maintenance Forms, Records and Publications questions are written to the same area.
No code in this area is on the FAA’s latest list of most-missed codes (2nd Quarter, CY25), which names a code only when it was missed more than 70% of the time on at least 100 tests.
Mechanic privileges and limitations questions and answers
10 questions in the test’s own format, each with 3 options and 1 correct answer. Pick yours, then open it to see the answer and the reason. Each one names the page it was written from, so you can check it.
- Q.01
Once you pass the last of your mechanic tests, you can be handed a temporary certificate. What is it for?
FAA-H-8083-30B, ch. 13, p. 13-1
- AIt lets you work only under a certificated mechanic until it runs out
- BIt covers the wait while the FAA reviews your papers and issues the official one
- CIt is a trial period during which an IA must countersign your work
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS B.
It covers the wait while the FAA reviews your papers and issues the official one
An applicant who passes all the required tests with at least 70 percent can be issued a temporary certificate, valid for not more than 120 days. During that time the FAA reviews the application and its supporting documents and issues the official certificate and rating. It is a certificate in its own right, not a supervised or trial period, so nobody has to watch over or countersign your work while you hold it.
- Q.02
A lead technician asks you to sign for a step you did not see done. Working through the 7-step checklist for an ethical decision, you have recognized and clarified the dilemma. What comes next?
FAA-H-8083-30B, ch. 13, p. 13-8
- AGet all the possible facts
- BMake your decision and act on it
- CPicture the decision printed in the local paper
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
Get all the possible facts
The 7 steps are: recognize and clarify the dilemma, get all the possible facts, list every option, test each option by asking whether it is legal, right and beneficial, make the decision, double check it by asking how you would feel if your family found out or it was printed in the local newspaper, and take action. Facts come second. The decision is step 5, and the newspaper test comes after it, as the double check.
- Q.03
The word ethics comes from an ancient Greek word. What did that Greek word mean?
FAA-H-8083-30B, ch. 13, p. 13-6
- ALaw or rule
- BDuty or service to others
- CCharacter or custom
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS C.
Character or custom
Ethics comes from the Greek word ethos, which means character or custom, and today it is defined as the study of standards of conduct and moral judgment. It is about how a person chooses to act, which is wider than a set of laws or rules, and duty and service are not what the word meant.
- Q.04
A shop is known for quoting short turnaround times to win work, then stretching them out and adding costs once the airplane is in its hangar. It offers you a job. What is the advice for a technician here?
FAA-H-8083-30B, ch. 13, p. 13-7
- ATake it, since a shop's quoting practices are a matter for its managers alone
- BTake it, as long as you report each misleading quote to the FAA afterward
- CAvoid working for a shop that thinks nothing of deceiving its customers
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS C.
Avoid working for a shop that thinks nothing of deceiving its customers
Some shops win work by quoting a turnaround they know is too short, or by underbidding and then adding costs as the job goes on. Technicians are encouraged to avoid working for shops that do not think twice about deceiving their customers, because the bottom-line thinking that misleads customers tends to drive its technicians' decisions too. Leaving it to the managers does not keep your own standards safe.
- Q.05
You passed the General written test 26 months ago and the Airframe and Powerplant written tests last year. Your oral and practical tests are next week. What about the General?
FAA-H-8083-30B, ch. 13, p. 13-3
- AIt must be passed again, since every required test has to fall within 24 months
- BIt still counts, since a written test result never runs out
- CIt still counts, as long as the oral and practical are passed first time
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
It must be passed again, since every required test has to fall within 24 months
To be eligible for a mechanic certificate you must have passed all the required tests, written, oral and practical, within the preceding 24 months. A General result 26 months old falls outside that window, so it has to be passed again before the certificate can be issued. A written result does run out, and passing the oral and practical first time does not bring an expired one back.
- Q.06
While you work on the ramp, a county sheriff's deputy asks to see your mechanic certificate. What do you do?
FAA-H-8083-30B, ch. 13, p. 13-4
- ADecline, since only an FAA inspector has the right to ask to see it
- BShow it, since local law enforcement officers may ask to see it
- CShow it only once the FAA has sent you a written request
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS B.
Show it, since local law enforcement officers may ask to see it
A mechanic certificate is kept in the immediate area where you normally work, and you must present it for inspection when asked by the FAA, an authorized representative of the NTSB, or any federal, state or local law enforcement officer. A sheriff's deputy is a local officer, so you show it there and then, with no need for anything in writing from the FAA.
- Q.07
A mechanic is unsure a repair is good enough, but tells himself the airplane will probably be fine for the owner's short trips. What test does the PAMA code of ethics give for a choice like that?
FAA-H-8083-30B, ch. 13, p. 13-8
- ANever knowingly put others at a risk you would not accept for yourself or your family
- BAccept a small risk to others if the owner has been told about it in writing
- CRelease it if the work meets the shop's usual standard on similar jobs
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
Never knowingly put others at a risk you would not accept for yourself or your family
The PAMA code reminds technicians that the safety and lives of others depend on their skill and judgment, so they must never knowingly subject others to risks they would not be willing to take for themselves or those dear to them. A note to the owner or a shop habit does not change that, and the same code says not to pass as airworthy anything you are in doubt about.
- Q.08
A new hire says the FAA's drug and alcohol testing of mechanics goes too far, since mechanics never fly the airplane. What reason does the handbook give for the FAA's hard line?
FAA-H-8083-30B, ch. 13, p. 13-3
- ANone: the testing covers only people who fly or dispatch the aircraft
- BAn impaired mechanic puts coworkers, the customer and themselves at risk
- CTest results are the main way the FAA finds falsified logbook entries
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS B.
An impaired mechanic puts coworkers, the customer and themselves at risk
People with aircraft maintenance or preventive maintenance duties are covered by the testing rules, at times such as pre-employment, random, post-accident and follow-up. The many test methods and the harsh penalties show how concerned the FAA is about technicians being impaired. The handbook says there is no room in the profession for substance abuse: an impaired technician endangers themselves, their coworkers and, in the end, the customer who expects an airworthy aircraft. Testing has nothing to do with finding false records.
- Q.09
A mechanic who skipped an inspection step writes it up as done, on the view that a logbook entry is only paperwork. Why does the FAA act so strongly against false entries like this?
FAA-H-8083-30B, ch. 13, p. 13-2
- AFalse entries are the main source of the fines it collects from shops
- BA false entry cancels the aircraft's registration until it is fixed
- CProper records are fundamental to operating the civil fleet safely
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS C.
Proper records are fundamental to operating the civil fleet safely
Sections 43.9 and 43.11 set out the entries a technician makes for the work and inspections performed, and the handbook calls that documentation fundamental to the safe and efficient operation of the U.S. civil aircraft fleet. That is why the FAA takes strong action against falsification: an intentionally false entry is grounds to suspend or revoke a certificate or rating. A false entry is not a registration matter, and the reason given is safety, not money.
- Q.10
An IA has not done enough annual or major repair inspections to renew that way, so they book an oral test with an FSDO inspector and worry it looks bad. How does the handbook say to see this route?
FAA-H-8083-30B, ch. 13, p. 13-6
- AAs a professional follow-up with the FSDO, not a mark against them
- BAs a penalty that the FSDO notes on the IA's file for the next renewal
- CAs a route that is open only to an IA in the first year of holding one
SHOW THE ANSWERHIDE THE ANSWER
THE ANSWER IS A.
As a professional follow-up with the FSDO, not a mark against them
Passing an oral test given by an FAA inspector, to show current knowledge of the applicable regulations and standards, is one of the ways to renew an inspection authorization. It is often thought of as the renewal method of last resort, but the handbook says it should not be seen as a negative experience. For an IA who has worked professionally all year it is a professional follow-up or consultation, and it can improve how the IA and the FSDO inspector work together. Nothing makes it a penalty or limits who may use it.
We wrote these questions for this page from the FAA handbooks. They are not FAA test questions, and none of them comes from our question bank. Each one names the handbook page it was written from, so you can check it.
How a missed code comes back at the oral
Your test report does not show the questions you missed. It prints the ACS code for what each one tested, and a question missed in this subject prints a code that starts AM.I.I. The examiner reads those codes before your oral and practical.
The General oral runs from 4 questions if your written was clean up to 22, because every code you missed adds 1 more. General also carries 9 practical projects, each with 2 questions attached.
Knowledge elements are tested on the written test and the oral; Risk Management elements are tested on the oral and the practical; Skill elements are tested on the practical only. The whole process is on the oral and practical page, and there are cards to practice the spoken half with on FAA A&P oral test practice questions.
Questions people ask about mechanic privileges and limitations
Q.01What may a mechanic not do under 14 CFR 65.81?
A mechanic may do or supervise the maintenance, preventive maintenance and alteration of what they are rated for, but not major repairs or major alterations of propellers, and not any repair or alteration of instruments, which belong to certificated repairmen at a repair station. Nor may they supervise a job they have not done satisfactorily at an earlier date.
Q.02What must a mechanic understand before using the certificate on a job?
The current instructions of the manufacturer and the maintenance manuals for the specific operation. The certificate does not cover work done without them.
Q.03What is the recency requirement for an FAA A&P mechanic?
The certificate stays valid until it is surrendered, suspended or revoked, but under 14 CFR 65.83 it may not be used unless, for at least 6 of the past 24 months, the holder has served as a mechanic, technically supervised other mechanics, or supervised maintenance or alteration of an aircraft in an executive capacity.
Q.04What can an inspection authorization holder do that a mechanic cannot?
Perform an annual inspection, perform or supervise a progressive inspection, and approve for return to service an aircraft, or a part or appliance, after a major repair or major alteration. A mechanic without an IA may do the work of a major repair, but the return to service has to be signed by an IA.
Q.05How many mechanic privileges and limitations questions are on the FAA A&P General test?
The FAA does not publish a fixed number. Its Companion Guide to the ACS gives the Regulations, Maintenance Forms, Records, and Publications subject area 5 to 10% of the General test, which is 3 to 6 of the 60 scored questions. That is a range, not a quota, so your own test can land anywhere inside it.
Q.06Which FAA handbook chapter covers mechanic privileges and limitations?
Chapter 13 of FAA-H-8083-30B, the Aviation Maintenance Technician Handbook: General, titled "Mechanic Privileges & Limitations". It runs from pages 13-1 to 13-8, and the FAA publishes the whole handbook free as a PDF.
Read the documents, not us
Every fact on this page was read from these on 19 August 2026 and 15 November 2026. They are the authority and we are the summary. If we and one of them disagree, they are right.
- FAA-H-8083-30B, Aviation Maintenance Technician Handbook: General, chapter 13www.faa.gov
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standardswww.faa.gov
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards: the written test blueprints (pages 13 and 14) and chapters 6 and 7www.faa.gov
- FAA, Frequently Missed Knowledge Test ACS Codes, 2nd Quarter CY25www.faa.gov
FREE PLAN · NO CARD · 25 QUESTIONS TO START
The bank holds 154 mechanic privileges and limitations questions.
Start with one free set: 25 questions and 25 fill-in-the-gaps from any of our 44 subjects, which cover every ACS subject area. Each question has 3 answer choices, like the FAA A&P tests, with a written explanation behind every answer and, for every answer written from the FAA handbooks, the chapter it came from. It needs no card. Pro opens the rest of the bank, the full study guides and the timed mock papers.
Start freeOr answer a few first. The free FAA A&P practice test runs on the page, with no account.